Enum bdk::wallet::tx_builder::AddForeignUtxoError

source Â·

pub enum AddForeignUtxoError {
+

`AddForeignUtxoError`

`Enum bdk::wallet::tx_builder::AddForeignUtxoError`

source Â·

pub enum AddForeignUtxoError {
     InvalidTxid {
         input_txid: Txid,
         foreign_utxo: OutPoint,
@@ -12,7 +12,7 @@

Foreign utxo outpoint txid does not match PSBT input txid

Â§InvalidOutpoint(OutPoint)

Requested outpoint doesnât exist in the tx (vout greater than available outputs)

Â§MissingUtxo

Foreign utxo missing witness_utxo or non_witness_utxo

`Trait ImplementationsÂ§`

sourceÂ§impl Debug for AddForeignUtxoError

sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

sourceÂ§impl Display for AddForeignUtxoError

sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

sourceÂ§impl Error for AddForeignUtxoError

1.30.0 Â· sourceÂ§fn source(&self) -> Option<&(dyn Error + 'static)>

The lower-level source of this error, if any. Read more

1.0.0 Â· sourceÂ§fn description(&self) -> &str

ðDeprecated since 1.42.0: use the Display impl or to_string() Read more

1.0.0 Â· sourceÂ§fn cause(&self) -> Option<&dyn Error>

ðDeprecated since 1.33.0: replaced by Error::source, which can support downcasting

sourceÂ§fn provide<'a>(&'a self, demand: &mut Demand<'a>)

ð¬This is a nightly-only experimental API. (error_generic_member_access)Provides type based access to context intended for error reports. Read more

`Auto Trait ImplementationsÂ§`

Â§impl RefUnwindSafe for AddForeignUtxoError

Â§impl Send for AddForeignUtxoError

Â§impl Sync for AddForeignUtxoError

Â§impl Unpin for AddForeignUtxoError

Â§impl UnwindSafe for AddForeignUtxoError

`Blanket ImplementationsÂ§`

sourceÂ§impl<T> Any for Twhere
    T: 'static + ?Sized,

sourceÂ§fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

sourceÂ§impl<T> Borrow<T> for Twhere
    T: ?Sized,

const: unstable Â· sourceÂ§fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

sourceÂ§impl<T> BorrowMut<T> for Twhere
    T: ?Sized,

const: unstable Â· sourceÂ§fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

sourceÂ§impl<T> From<T> for T

const: unstable Â· sourceÂ§fn from(t: T) -> T

Returns the argument unchanged.

`Trait ImplementationsÂ§`

sourceÂ§impl Debug for AddForeignUtxoError

sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

sourceÂ§impl Display for AddForeignUtxoError

sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

sourceÂ§impl Error for AddForeignUtxoError

1.30.0 Â· sourceÂ§fn source(&self) -> Option<&(dyn Error + 'static)>

The lower-level source of this error, if any. Read more

1.0.0 Â· sourceÂ§fn description(&self) -> &str

ðDeprecated since 1.42.0: use the Display impl or to_string() Read more

1.0.0 Â· sourceÂ§fn cause(&self) -> Option<&dyn Error>

ðDeprecated since 1.33.0: replaced by Error::source, which can support downcasting

sourceÂ§fn provide<'a>(&'a self, demand: &mut Demand<'a>)

ð¬This is a nightly-only experimental API. (error_generic_member_access)Provides type based access to context intended for error reports. Read more

`Auto Trait ImplementationsÂ§`

Â§impl RefUnwindSafe for AddForeignUtxoError

Â§impl Send for AddForeignUtxoError

Â§impl Sync for AddForeignUtxoError

Â§impl Unpin for AddForeignUtxoError

Â§impl UnwindSafe for AddForeignUtxoError

`Blanket ImplementationsÂ§`

sourceÂ§impl<T> Any for Twhere
    T: 'static + ?Sized,

sourceÂ§fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

sourceÂ§impl<T> Borrow<T> for Twhere
    T: ?Sized,

const: unstable Â· sourceÂ§fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

sourceÂ§impl<T> BorrowMut<T> for Twhere
    T: ?Sized,

const: unstable Â· sourceÂ§fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

sourceÂ§impl<T> From<T> for T

const: unstable Â· sourceÂ§fn from(t: T) -> T

Returns the argument unchanged.

sourceÂ§impl<T, U> Into<U> for Twhere
    U: From<T>,

const: unstable Â· sourceÂ§fn into(self) -> U

Calls U::from(self).


 That is, this conversion is whatever the implementation of
 From<T> for U chooses to do.
diff --git a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.AddUtxoError.html b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.AddUtxoError.html
index 3896245beb..7a7006a867 100644
--- a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.AddUtxoError.html
+++ b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.AddUtxoError.html
@@ -1,9 +1,9 @@
 AddUtxoError in bdk::wallet::tx_builder - Rust

-                    AddUtxoError
Variants
UnknownUtxo
Trait Implementations
Debug
Display
Error
Auto Trait Implementations
RefUnwindSafe
Send
Sync
Unpin
UnwindSafe
Blanket Implementations
Any
Borrow<T>
BorrowMut<T>
From<T>
Into<U>
Provider
ToString
TryFrom<U>
TryInto<U>
VZip<V>
In bdk::wallet::tx_builder
?
Enum bdk::wallet::tx_builder::AddUtxoError
source Â· 
pub enum AddUtxoError {
+                    
AddUtxoError
Variants
UnknownUtxo
Trait Implementations
Debug
Display
Error
Auto Trait Implementations
RefUnwindSafe
Send
Sync
Unpin
UnwindSafe
Blanket Implementations
Any
Borrow<T>
BorrowMut<T>
From<T>
Into<U>
Provider
ToString
TryFrom<U>
TryInto<U>
VZip<V>
In bdk::wallet::tx_builder
?
Enum bdk::wallet::tx_builder::AddUtxoError
source Â· 
pub enum AddUtxoError {
     UnknownUtxo(OutPoint),
 }
Expand description
Error returned from TxBuilder::add_utxo and TxBuilder::add_utxos

 
VariantsÂ§
Â§UnknownUtxo(OutPoint)
Happens when trying to spend an UTXO that is not in the internal database

-
Trait ImplementationsÂ§
sourceÂ§impl Debug for AddUtxoError
sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result
Formats the value using the given formatter. Read more
sourceÂ§impl Display for AddUtxoError
sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result
Formats the value using the given formatter. Read more
sourceÂ§impl Error for AddUtxoError
1.30.0 Â· sourceÂ§fn source(&self) -> Option<&(dyn Error + 'static)>
The lower-level source of this error, if any. Read more
1.0.0 Â· sourceÂ§fn description(&self) -> &str
ðDeprecated since 1.42.0: use the Display impl or to_string() Read more
1.0.0 Â· sourceÂ§fn cause(&self) -> Option<&dyn Error>
ðDeprecated since 1.33.0: replaced by Error::source, which can support downcasting
sourceÂ§fn provide<'a>(&'a self, demand: &mut Demand<'a>)
ð¬This is a nightly-only experimental API. (error_generic_member_access)Provides type based access to context intended for error reports. Read more
Auto Trait ImplementationsÂ§
Â§impl RefUnwindSafe for AddUtxoError
Â§impl Send for AddUtxoError
Â§impl Sync for AddUtxoError
Â§impl Unpin for AddUtxoError
Â§impl UnwindSafe for AddUtxoError
Blanket ImplementationsÂ§
sourceÂ§impl<T> Any for Twhere
    T: 'static + ?Sized,
sourceÂ§fn type_id(&self) -> TypeId
Gets the TypeId of self. Read more
sourceÂ§impl<T> Borrow<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow(&self) -> &T
Immutably borrows from an owned value. Read more
sourceÂ§impl<T> BorrowMut<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceÂ§impl<T> From<T> for T
const: unstable Â· sourceÂ§fn from(t: T) -> T
Returns the argument unchanged.

+
Trait ImplementationsÂ§
sourceÂ§impl Debug for AddUtxoError
sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result
Formats the value using the given formatter. Read more
sourceÂ§impl Display for AddUtxoError
sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result
Formats the value using the given formatter. Read more
sourceÂ§impl Error for AddUtxoError
1.30.0 Â· sourceÂ§fn source(&self) -> Option<&(dyn Error + 'static)>
The lower-level source of this error, if any. Read more
1.0.0 Â· sourceÂ§fn description(&self) -> &str
ðDeprecated since 1.42.0: use the Display impl or to_string() Read more
1.0.0 Â· sourceÂ§fn cause(&self) -> Option<&dyn Error>
ðDeprecated since 1.33.0: replaced by Error::source, which can support downcasting
sourceÂ§fn provide<'a>(&'a self, demand: &mut Demand<'a>)
ð¬This is a nightly-only experimental API. (error_generic_member_access)Provides type based access to context intended for error reports. Read more
Auto Trait ImplementationsÂ§
Â§impl RefUnwindSafe for AddUtxoError
Â§impl Send for AddUtxoError
Â§impl Sync for AddUtxoError
Â§impl Unpin for AddUtxoError
Â§impl UnwindSafe for AddUtxoError
Blanket ImplementationsÂ§
sourceÂ§impl<T> Any for Twhere
    T: 'static + ?Sized,
sourceÂ§fn type_id(&self) -> TypeId
Gets the TypeId of self. Read more
sourceÂ§impl<T> Borrow<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow(&self) -> &T
Immutably borrows from an owned value. Read more
sourceÂ§impl<T> BorrowMut<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceÂ§impl<T> From<T> for T
const: unstable Â· sourceÂ§fn from(t: T) -> T
Returns the argument unchanged.

 
sourceÂ§impl<T, U> Into<U> for Twhere
    U: From<T>,
const: unstable Â· sourceÂ§fn into(self) -> U
Calls U::from(self).

 That is, this conversion is whatever the implementation of
 From<T> for U chooses to do.
diff --git a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.AllowShrinkingError.html b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.AllowShrinkingError.html
index 39134d285e..d1bc94b62e 100644
--- a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.AllowShrinkingError.html
+++ b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.AllowShrinkingError.html
@@ -1,9 +1,9 @@
 AllowShrinkingError in bdk::wallet::tx_builder - Rust

-                    AllowShrinkingError
Variants
MissingScriptPubKey
Trait Implementations
Debug
Display
Error
Auto Trait Implementations
RefUnwindSafe
Send
Sync
Unpin
UnwindSafe
Blanket Implementations
Any
Borrow<T>
BorrowMut<T>
From<T>
Into<U>
Provider
ToString
TryFrom<U>
TryInto<U>
VZip<V>
In bdk::wallet::tx_builder
?
Enum bdk::wallet::tx_builder::AllowShrinkingError
source Â· 
pub enum AllowShrinkingError {
+                    
AllowShrinkingError
Variants
MissingScriptPubKey
Trait Implementations
Debug
Display
Error
Auto Trait Implementations
RefUnwindSafe
Send
Sync
Unpin
UnwindSafe
Blanket Implementations
Any
Borrow<T>
BorrowMut<T>
From<T>
Into<U>
Provider
ToString
TryFrom<U>
TryInto<U>
VZip<V>
In bdk::wallet::tx_builder
?
Enum bdk::wallet::tx_builder::AllowShrinkingError
source Â· 
pub enum AllowShrinkingError {
     MissingScriptPubKey(ScriptBuf),
 }
Expand description
Error returned from TxBuilder::allow_shrinking

 
VariantsÂ§
Â§MissingScriptPubKey(ScriptBuf)
Script/PubKey was not in the original transaction

-
Trait ImplementationsÂ§
sourceÂ§impl Debug for AllowShrinkingError
sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result
Formats the value using the given formatter. Read more
sourceÂ§impl Display for AllowShrinkingError
sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result
Formats the value using the given formatter. Read more
sourceÂ§impl Error for AllowShrinkingError
1.30.0 Â· sourceÂ§fn source(&self) -> Option<&(dyn Error + 'static)>
The lower-level source of this error, if any. Read more
1.0.0 Â· sourceÂ§fn description(&self) -> &str
ðDeprecated since 1.42.0: use the Display impl or to_string() Read more
1.0.0 Â· sourceÂ§fn cause(&self) -> Option<&dyn Error>
ðDeprecated since 1.33.0: replaced by Error::source, which can support downcasting
sourceÂ§fn provide<'a>(&'a self, demand: &mut Demand<'a>)
ð¬This is a nightly-only experimental API. (error_generic_member_access)Provides type based access to context intended for error reports. Read more
Auto Trait ImplementationsÂ§
Â§impl RefUnwindSafe for AllowShrinkingError
Â§impl Send for AllowShrinkingError
Â§impl Sync for AllowShrinkingError
Â§impl Unpin for AllowShrinkingError
Â§impl UnwindSafe for AllowShrinkingError
Blanket ImplementationsÂ§
sourceÂ§impl<T> Any for Twhere
    T: 'static + ?Sized,
sourceÂ§fn type_id(&self) -> TypeId
Gets the TypeId of self. Read more
sourceÂ§impl<T> Borrow<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow(&self) -> &T
Immutably borrows from an owned value. Read more
sourceÂ§impl<T> BorrowMut<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceÂ§impl<T> From<T> for T
const: unstable Â· sourceÂ§fn from(t: T) -> T
Returns the argument unchanged.

+
Trait ImplementationsÂ§
sourceÂ§impl Debug for AllowShrinkingError
sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result
Formats the value using the given formatter. Read more
sourceÂ§impl Display for AllowShrinkingError
sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result
Formats the value using the given formatter. Read more
sourceÂ§impl Error for AllowShrinkingError
1.30.0 Â· sourceÂ§fn source(&self) -> Option<&(dyn Error + 'static)>
The lower-level source of this error, if any. Read more
1.0.0 Â· sourceÂ§fn description(&self) -> &str
ðDeprecated since 1.42.0: use the Display impl or to_string() Read more
1.0.0 Â· sourceÂ§fn cause(&self) -> Option<&dyn Error>
ðDeprecated since 1.33.0: replaced by Error::source, which can support downcasting
sourceÂ§fn provide<'a>(&'a self, demand: &mut Demand<'a>)
ð¬This is a nightly-only experimental API. (error_generic_member_access)Provides type based access to context intended for error reports. Read more
Auto Trait ImplementationsÂ§
Â§impl RefUnwindSafe for AllowShrinkingError
Â§impl Send for AllowShrinkingError
Â§impl Sync for AllowShrinkingError
Â§impl Unpin for AllowShrinkingError
Â§impl UnwindSafe for AllowShrinkingError
Blanket ImplementationsÂ§
sourceÂ§impl<T> Any for Twhere
    T: 'static + ?Sized,
sourceÂ§fn type_id(&self) -> TypeId
Gets the TypeId of self. Read more
sourceÂ§impl<T> Borrow<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow(&self) -> &T
Immutably borrows from an owned value. Read more
sourceÂ§impl<T> BorrowMut<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceÂ§impl<T> From<T> for T
const: unstable Â· sourceÂ§fn from(t: T) -> T
Returns the argument unchanged.

 
sourceÂ§impl<T, U> Into<U> for Twhere
    U: From<T>,
const: unstable Â· sourceÂ§fn into(self) -> U
Calls U::from(self).

 That is, this conversion is whatever the implementation of
 From<T> for U chooses to do.
diff --git a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.ChangeSpendPolicy.html b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.ChangeSpendPolicy.html
index 416c418cec..a4908bfc11 100644
--- a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.ChangeSpendPolicy.html
+++ b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.ChangeSpendPolicy.html
@@ -1,5 +1,5 @@
 ChangeSpendPolicy in bdk::wallet::tx_builder - Rust

-                    ChangeSpendPolicy
Variants
ChangeAllowed
ChangeForbidden
OnlyChange
Trait Implementations
Clone
Copy
Debug
Default
Eq
Hash
Ord
PartialEq<ChangeSpendPolicy>
PartialOrd<ChangeSpendPolicy>
StructuralEq
StructuralPartialEq
Auto Trait Implementations
RefUnwindSafe
Send
Sync
Unpin
UnwindSafe
Blanket Implementations
Any
Borrow<T>
BorrowMut<T>
From<T>
Into<U>
ToOwned
TryFrom<U>
TryInto<U>
VZip<V>
In bdk::wallet::tx_builder
?
Enum bdk::wallet::tx_builder::ChangeSpendPolicy
source Â· 
pub enum ChangeSpendPolicy {
+                    
ChangeSpendPolicy
Variants
ChangeAllowed
ChangeForbidden
OnlyChange
Trait Implementations
Clone
Copy
Debug
Default
Eq
Hash
Ord
PartialEq<ChangeSpendPolicy>
PartialOrd<ChangeSpendPolicy>
StructuralEq
StructuralPartialEq
Auto Trait Implementations
RefUnwindSafe
Send
Sync
Unpin
UnwindSafe
Blanket Implementations
Any
Borrow<T>
BorrowMut<T>
From<T>
Into<U>
ToOwned
TryFrom<U>
TryInto<U>
VZip<V>
In bdk::wallet::tx_builder
?
Enum bdk::wallet::tx_builder::ChangeSpendPolicy
source Â· 
pub enum ChangeSpendPolicy {
     ChangeAllowed,
     OnlyChange,
     ChangeForbidden,
@@ -7,11 +7,11 @@
 
VariantsÂ§
Â§ChangeAllowed
Use both change and non-change outputs (default)

 
Â§OnlyChange
Only use change outputs (see TxBuilder::only_spend_change)

 
Â§ChangeForbidden
Only use non-change outputs (see TxBuilder::do_not_spend_change)

-
Trait ImplementationsÂ§
sourceÂ§impl Clone for ChangeSpendPolicy
sourceÂ§fn clone(&self) -> ChangeSpendPolicy
Returns a copy of the value. Read more
1.0.0 Â· sourceÂ§fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source. Read more
sourceÂ§impl Debug for ChangeSpendPolicy
sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result
Formats the value using the given formatter. Read more
sourceÂ§impl Default for ChangeSpendPolicy
sourceÂ§fn default() -> Self
Returns the âdefault valueâ for a type. Read more
sourceÂ§impl Hash for ChangeSpendPolicy
sourceÂ§fn hash<__H: Hasher>(&self, state: &mut __H)
Feeds this value into the given Hasher. Read more
1.3.0 Â· sourceÂ§fn hash_slice<H>(data: &[Self], state: &mut H)where
    H: Hasher,
    Self: Sized,
Feeds a slice of this type into the given Hasher. Read more
sourceÂ§impl Ord for ChangeSpendPolicy
sourceÂ§fn cmp(&self, other: &ChangeSpendPolicy) -> Ordering
This method returns an Ordering between self and other. Read more
1.21.0 Â· sourceÂ§fn max(self, other: Self) -> Selfwhere
    Self: Sized,
Compares and returns the maximum of two values. Read more
1.21.0 Â· sourceÂ§fn min(self, other: Self) -> Selfwhere
    Self: Sized,
Compares and returns the minimum of two values. Read more
1.50.0 Â· sourceÂ§fn clamp(self, min: Self, max: Self) -> Selfwhere
    Self: Sized + PartialOrd<Self>,
Restrict a value to a certain interval. Read more
sourceÂ§impl PartialEq<ChangeSpendPolicy> for ChangeSpendPolicy
sourceÂ§fn eq(&self, other: &ChangeSpendPolicy) -> bool
This method tests for self and other values to be equal, and is used
+
Trait ImplementationsÂ§
sourceÂ§impl Clone for ChangeSpendPolicy
sourceÂ§fn clone(&self) -> ChangeSpendPolicy
Returns a copy of the value. Read more
1.0.0 Â· sourceÂ§fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source. Read more
sourceÂ§impl Debug for ChangeSpendPolicy
sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result
Formats the value using the given formatter. Read more
sourceÂ§impl Default for ChangeSpendPolicy
sourceÂ§fn default() -> Self
Returns the âdefault valueâ for a type. Read more
sourceÂ§impl Hash for ChangeSpendPolicy
sourceÂ§fn hash<__H: Hasher>(&self, state: &mut __H)
Feeds this value into the given Hasher. Read more
1.3.0 Â· sourceÂ§fn hash_slice<H>(data: &[Self], state: &mut H)where
    H: Hasher,
    Self: Sized,
Feeds a slice of this type into the given Hasher. Read more
sourceÂ§impl Ord for ChangeSpendPolicy
sourceÂ§fn cmp(&self, other: &ChangeSpendPolicy) -> Ordering
This method returns an Ordering between self and other. Read more
1.21.0 Â· sourceÂ§fn max(self, other: Self) -> Selfwhere
    Self: Sized,
Compares and returns the maximum of two values. Read more
1.21.0 Â· sourceÂ§fn min(self, other: Self) -> Selfwhere
    Self: Sized,
Compares and returns the minimum of two values. Read more
1.50.0 Â· sourceÂ§fn clamp(self, min: Self, max: Self) -> Selfwhere
    Self: Sized + PartialOrd<Self>,
Restrict a value to a certain interval. Read more
sourceÂ§impl PartialEq<ChangeSpendPolicy> for ChangeSpendPolicy
sourceÂ§fn eq(&self, other: &ChangeSpendPolicy) -> bool
This method tests for self and other values to be equal, and is used
 by ==. Read more
1.0.0 Â· sourceÂ§fn ne(&self, other: &Rhs) -> bool
This method tests for !=. The default implementation is almost always
-sufficient, and should not be overridden without very good reason. Read more
sourceÂ§impl PartialOrd<ChangeSpendPolicy> for ChangeSpendPolicy
sourceÂ§fn partial_cmp(&self, other: &ChangeSpendPolicy) -> Option<Ordering>
This method returns an ordering between self and other values if one exists. Read more
1.0.0 Â· sourceÂ§fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 Â· sourceÂ§fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self and other) and is used by the <=
+sufficient, and should not be overridden without very good reason. Read more
sourceÂ§impl PartialOrd<ChangeSpendPolicy> for ChangeSpendPolicy
sourceÂ§fn partial_cmp(&self, other: &ChangeSpendPolicy) -> Option<Ordering>
This method returns an ordering between self and other values if one exists. Read more
1.0.0 Â· sourceÂ§fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 Â· sourceÂ§fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self and other) and is used by the <=
 operator. Read more
1.0.0 Â· sourceÂ§fn gt(&self, other: &Rhs) -> bool
This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 Â· sourceÂ§fn ge(&self, other: &Rhs) -> bool
This method tests greater than or equal to (for self and other) and is used by the >=
-operator. Read more
sourceÂ§impl Copy for ChangeSpendPolicy
sourceÂ§impl Eq for ChangeSpendPolicy
sourceÂ§impl StructuralEq for ChangeSpendPolicy
sourceÂ§impl StructuralPartialEq for ChangeSpendPolicy
Auto Trait ImplementationsÂ§
Â§impl RefUnwindSafe for ChangeSpendPolicy
Â§impl Send for ChangeSpendPolicy
Â§impl Sync for ChangeSpendPolicy
Â§impl Unpin for ChangeSpendPolicy
Â§impl UnwindSafe for ChangeSpendPolicy
Blanket ImplementationsÂ§
sourceÂ§impl<T> Any for Twhere
    T: 'static + ?Sized,
sourceÂ§fn type_id(&self) -> TypeId
Gets the TypeId of self. Read more
sourceÂ§impl<T> Borrow<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow(&self) -> &T
Immutably borrows from an owned value. Read more
sourceÂ§impl<T> BorrowMut<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceÂ§impl<T> From<T> for T
const: unstable Â· sourceÂ§fn from(t: T) -> T
Returns the argument unchanged.

+operator. Read more
sourceÂ§impl Copy for ChangeSpendPolicy
sourceÂ§impl Eq for ChangeSpendPolicy
sourceÂ§impl StructuralEq for ChangeSpendPolicy
sourceÂ§impl StructuralPartialEq for ChangeSpendPolicy
Auto Trait ImplementationsÂ§
Â§impl RefUnwindSafe for ChangeSpendPolicy
Â§impl Send for ChangeSpendPolicy
Â§impl Sync for ChangeSpendPolicy
Â§impl Unpin for ChangeSpendPolicy
Â§impl UnwindSafe for ChangeSpendPolicy
Blanket ImplementationsÂ§
sourceÂ§impl<T> Any for Twhere
    T: 'static + ?Sized,
sourceÂ§fn type_id(&self) -> TypeId
Gets the TypeId of self. Read more
sourceÂ§impl<T> Borrow<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow(&self) -> &T
Immutably borrows from an owned value. Read more
sourceÂ§impl<T> BorrowMut<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceÂ§impl<T> From<T> for T
const: unstable Â· sourceÂ§fn from(t: T) -> T
Returns the argument unchanged.

 
sourceÂ§impl<T, U> Into<U> for Twhere
    U: From<T>,
const: unstable Â· sourceÂ§fn into(self) -> U
Calls U::from(self).

 That is, this conversion is whatever the implementation of
 From<T> for U chooses to do.
diff --git a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.TxOrdering.html b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.TxOrdering.html
index db909deaa6..64580f5b0e 100644
--- a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.TxOrdering.html
+++ b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/enum.TxOrdering.html
@@ -1,5 +1,5 @@
 TxOrdering in bdk::wallet::tx_builder - Rust

-                    TxOrdering
Variants
Bip69Lexicographic
Shuffle
Untouched
Methods
sort_tx
Trait Implementations
Clone
Copy
Debug
Default
Eq
Hash
Ord
PartialEq<TxOrdering>
PartialOrd<TxOrdering>
StructuralEq
StructuralPartialEq
Auto Trait Implementations
RefUnwindSafe
Send
Sync
Unpin
UnwindSafe
Blanket Implementations
Any
Borrow<T>
BorrowMut<T>
From<T>
Into<U>
ToOwned
TryFrom<U>
TryInto<U>
VZip<V>
In bdk::wallet::tx_builder
?
Enum bdk::wallet::tx_builder::TxOrdering
source Â· 
pub enum TxOrdering {
+                    
TxOrdering
Variants
Bip69Lexicographic
Shuffle
Untouched
Methods
sort_tx
Trait Implementations
Clone
Copy
Debug
Default
Eq
Hash
Ord
PartialEq<TxOrdering>
PartialOrd<TxOrdering>
StructuralEq
StructuralPartialEq
Auto Trait Implementations
RefUnwindSafe
Send
Sync
Unpin
UnwindSafe
Blanket Implementations
Any
Borrow<T>
BorrowMut<T>
From<T>
Into<U>
ToOwned
TryFrom<U>
TryInto<U>
VZip<V>
In bdk::wallet::tx_builder
?
Enum bdk::wallet::tx_builder::TxOrdering
source Â· 
pub enum TxOrdering {
     Shuffle,
     Untouched,
     Bip69Lexicographic,
@@ -7,12 +7,12 @@
 
VariantsÂ§
Â§Shuffle
Randomized (default)

 
Â§Untouched
Unchanged

 
Â§Bip69Lexicographic
BIP69 / Lexicographic

-
ImplementationsÂ§
sourceÂ§impl TxOrdering
sourcepub fn sort_tx(&self, tx: &mut Transaction)
Sort transaction inputs and outputs by TxOrdering variant

-
Trait ImplementationsÂ§
sourceÂ§impl Clone for TxOrdering
sourceÂ§fn clone(&self) -> TxOrdering
Returns a copy of the value. Read more
1.0.0 Â· sourceÂ§fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source. Read more
sourceÂ§impl Debug for TxOrdering
sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result
Formats the value using the given formatter. Read more
sourceÂ§impl Default for TxOrdering
sourceÂ§fn default() -> Self
Returns the âdefault valueâ for a type. Read more
sourceÂ§impl Hash for TxOrdering
sourceÂ§fn hash<__H: Hasher>(&self, state: &mut __H)
Feeds this value into the given Hasher. Read more
1.3.0 Â· sourceÂ§fn hash_slice<H>(data: &[Self], state: &mut H)where
    H: Hasher,
    Self: Sized,
Feeds a slice of this type into the given Hasher. Read more
sourceÂ§impl Ord for TxOrdering
sourceÂ§fn cmp(&self, other: &TxOrdering) -> Ordering
This method returns an Ordering between self and other. Read more
1.21.0 Â· sourceÂ§fn max(self, other: Self) -> Selfwhere
    Self: Sized,
Compares and returns the maximum of two values. Read more
1.21.0 Â· sourceÂ§fn min(self, other: Self) -> Selfwhere
    Self: Sized,
Compares and returns the minimum of two values. Read more
1.50.0 Â· sourceÂ§fn clamp(self, min: Self, max: Self) -> Selfwhere
    Self: Sized + PartialOrd<Self>,
Restrict a value to a certain interval. Read more
sourceÂ§impl PartialEq<TxOrdering> for TxOrdering
sourceÂ§fn eq(&self, other: &TxOrdering) -> bool
This method tests for self and other values to be equal, and is used
+
ImplementationsÂ§
sourceÂ§impl TxOrdering
sourcepub fn sort_tx(&self, tx: &mut Transaction)
Sort transaction inputs and outputs by TxOrdering variant

+
Trait ImplementationsÂ§
sourceÂ§impl Clone for TxOrdering
sourceÂ§fn clone(&self) -> TxOrdering
Returns a copy of the value. Read more
1.0.0 Â· sourceÂ§fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source. Read more
sourceÂ§impl Debug for TxOrdering
sourceÂ§fn fmt(&self, f: &mut Formatter<'_>) -> Result
Formats the value using the given formatter. Read more
sourceÂ§impl Default for TxOrdering
sourceÂ§fn default() -> Self
Returns the âdefault valueâ for a type. Read more
sourceÂ§impl Hash for TxOrdering
sourceÂ§fn hash<__H: Hasher>(&self, state: &mut __H)
Feeds this value into the given Hasher. Read more
1.3.0 Â· sourceÂ§fn hash_slice<H>(data: &[Self], state: &mut H)where
    H: Hasher,
    Self: Sized,
Feeds a slice of this type into the given Hasher. Read more
sourceÂ§impl Ord for TxOrdering
sourceÂ§fn cmp(&self, other: &TxOrdering) -> Ordering
This method returns an Ordering between self and other. Read more
1.21.0 Â· sourceÂ§fn max(self, other: Self) -> Selfwhere
    Self: Sized,
Compares and returns the maximum of two values. Read more
1.21.0 Â· sourceÂ§fn min(self, other: Self) -> Selfwhere
    Self: Sized,
Compares and returns the minimum of two values. Read more
1.50.0 Â· sourceÂ§fn clamp(self, min: Self, max: Self) -> Selfwhere
    Self: Sized + PartialOrd<Self>,
Restrict a value to a certain interval. Read more
sourceÂ§impl PartialEq<TxOrdering> for TxOrdering
sourceÂ§fn eq(&self, other: &TxOrdering) -> bool
This method tests for self and other values to be equal, and is used
 by ==. Read more
1.0.0 Â· sourceÂ§fn ne(&self, other: &Rhs) -> bool
This method tests for !=. The default implementation is almost always
-sufficient, and should not be overridden without very good reason. Read more
sourceÂ§impl PartialOrd<TxOrdering> for TxOrdering
sourceÂ§fn partial_cmp(&self, other: &TxOrdering) -> Option<Ordering>
This method returns an ordering between self and other values if one exists. Read more
1.0.0 Â· sourceÂ§fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 Â· sourceÂ§fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self and other) and is used by the <=
+sufficient, and should not be overridden without very good reason. Read more
sourceÂ§impl PartialOrd<TxOrdering> for TxOrdering
sourceÂ§fn partial_cmp(&self, other: &TxOrdering) -> Option<Ordering>
This method returns an ordering between self and other values if one exists. Read more
1.0.0 Â· sourceÂ§fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 Â· sourceÂ§fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self and other) and is used by the <=
 operator. Read more
1.0.0 Â· sourceÂ§fn gt(&self, other: &Rhs) -> bool
This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 Â· sourceÂ§fn ge(&self, other: &Rhs) -> bool
This method tests greater than or equal to (for self and other) and is used by the >=
-operator. Read more
sourceÂ§impl Copy for TxOrdering
sourceÂ§impl Eq for TxOrdering
sourceÂ§impl StructuralEq for TxOrdering
sourceÂ§impl StructuralPartialEq for TxOrdering
Auto Trait ImplementationsÂ§
Â§impl RefUnwindSafe for TxOrdering
Â§impl Send for TxOrdering
Â§impl Sync for TxOrdering
Â§impl Unpin for TxOrdering
Â§impl UnwindSafe for TxOrdering
Blanket ImplementationsÂ§
sourceÂ§impl<T> Any for Twhere
    T: 'static + ?Sized,
sourceÂ§fn type_id(&self) -> TypeId
Gets the TypeId of self. Read more
sourceÂ§impl<T> Borrow<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow(&self) -> &T
Immutably borrows from an owned value. Read more
sourceÂ§impl<T> BorrowMut<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceÂ§impl<T> From<T> for T
const: unstable Â· sourceÂ§fn from(t: T) -> T
Returns the argument unchanged.

+operator. Read more
sourceÂ§impl Copy for TxOrdering
sourceÂ§impl Eq for TxOrdering
sourceÂ§impl StructuralEq for TxOrdering
sourceÂ§impl StructuralPartialEq for TxOrdering
Auto Trait ImplementationsÂ§
Â§impl RefUnwindSafe for TxOrdering
Â§impl Send for TxOrdering
Â§impl Sync for TxOrdering
Â§impl Unpin for TxOrdering
Â§impl UnwindSafe for TxOrdering
Blanket ImplementationsÂ§
sourceÂ§impl<T> Any for Twhere
    T: 'static + ?Sized,
sourceÂ§fn type_id(&self) -> TypeId
Gets the TypeId of self. Read more
sourceÂ§impl<T> Borrow<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow(&self) -> &T
Immutably borrows from an owned value. Read more
sourceÂ§impl<T> BorrowMut<T> for Twhere
    T: ?Sized,
const: unstable Â· sourceÂ§fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceÂ§impl<T> From<T> for T
const: unstable Â· sourceÂ§fn from(t: T) -> T
Returns the argument unchanged.

 
sourceÂ§impl<T, U> Into<U> for Twhere
    U: From<T>,
const: unstable Â· sourceÂ§fn into(self) -> U
Calls U::from(self).

 That is, this conversion is whatever the implementation of
 From<T> for U chooses to do.
diff --git a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/index.html b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/index.html
index 6dc4b53164..b2cf96949f 100644
--- a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/index.html
+++ b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/index.html
@@ -1,5 +1,5 @@
 bdk::wallet::tx_builder - Rust

-                    Module tx_builder
Structs
Enums
Traits?
Module bdk::wallet::tx_builder
source Â· Expand description
Transaction builder
+                    
Module tx_builder
Structs
Enums
Traits?
Module bdk::wallet::tx_builder
source Â· 
Expand description
Transaction builder
 Example
 // create a TxBuilder from a wallet
 let mut tx_builder = wallet.build_tx();
diff --git a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/struct.TxBuilder.html b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/struct.TxBuilder.html
index d2ace6a823..975d73b846 100644
--- a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/struct.TxBuilder.html
+++ b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/bdk/wallet/tx_builder/struct.TxBuilder.html
@@ -30,7 +30,7 @@ as in the following example:
 At the moment coin_selection is an exception to the rule as it consumes self.
 This means it is usually best to call coin_selection on the return value of build_tx before assigning it.
 For further examples see this moduleâs documentation;
-
ImplementationsÂ§sourceÂ§impl<'a, D, Cs: CoinSelectionAlgorithm, Ctx: TxBuilderContext> TxBuilder<'a, D, Cs, Ctx>
sourcepub fn fee_rate(&mut self, fee_rate: FeeRate) -> &mut Self
Set a custom fee rate
+
ImplementationsÂ§
sourceÂ§impl<'a, D, Cs: CoinSelectionAlgorithm, Ctx: TxBuilderContext> TxBuilder<'a, D, Cs, Ctx>
sourcepub fn fee_rate(&mut self, fee_rate: FeeRate) -> &mut Self
Set a custom fee rate
 The fee_rate method sets the mining fee paid by the transaction as a rate on its size.
 This means that the total fee paid is equal to this rate * size of the transaction in virtual Bytes (vB) or Weight Unit (wu).
 This rate is internally expressed in satoshis-per-virtual-bytes (sats/vB) using FeeRate::from_sat_per_vb, but can also be set by:

@@ -40,12 +40,18 @@ This rate is internally expressed in satoshis-per-virtual-bytes (sats/vB) using
 sats/kwu (250 sats/kwu == 1 sats/vB) using FeeRate::from_sat_per_kwu
 Default is 1 sat/vB (see min_relay_fee)
 
-
sourcepub fn fee_absolute(&mut self, fee_amount: u64) -> &mut Self
Set an absolute fee
+
Note that this is really a minimum feerate â itâs possible to
+overshoot it slightly since adding a change output to drain the remaining
+excess might not be viable.

+
sourcepub fn fee_absolute(&mut self, fee_amount: u64) -> &mut Self
Set an absolute fee
 The fee_absolute method refers to the absolute transaction fee in satoshis (sats).
 If anyone sets both the fee_absolute method and the fee_rate method,
 the FeePolicy enum will be set by whichever method was called last,
 as the FeeRate and FeeAmount are mutually exclusive.

-
sourcepub fn policy_path(
    &mut self,
    policy_path: BTreeMap<String, Vec<usize>>,
    keychain: KeychainKind
) -> &mut Self
Set the policy path to use while creating the transaction for a given keychain.

+Note that this is really a minimum absolute fee â itâs possible to
+overshoot it slightly since adding a change output to drain the remaining
+excess might not be viable.
+
sourcepub fn policy_path(
    &mut self,
    policy_path: BTreeMap<String, Vec<usize>>,
    keychain: KeychainKind
) -> &mut Self
Set the policy path to use while creating the transaction for a given keychain.

 This method accepts a map where the key is the policy node id (see
 Policy::id) and the value is the list of the indexes of
 the items that are intended to be satisfied from the policy node (see
@@ -92,14 +98,14 @@ path.insert("aabbccdd".to_string(), 50_000)
     .policy_path(path, KeychainKind::External);
 
-
sourcepub fn add_utxos(
    &mut self,
    outpoints: &[OutPoint]
) -> Result<&mut Self, AddUtxoError>
Add the list of outpoints to the internal list of UTXOs that must be spent.
+
sourcepub fn add_utxos(
    &mut self,
    outpoints: &[OutPoint]
) -> Result<&mut Self, AddUtxoError>
Add the list of outpoints to the internal list of UTXOs that must be spent.
 If an error occurs while adding any of the UTXOs then none of them are added and the error is returned.
 These have priority over the âunspendableâ utxos, meaning that if a utxo is present both in
 the âutxosâ and the âunspendableâ list, it will be spent.
-
sourcepub fn add_utxo(&mut self, outpoint: OutPoint) -> Result<&mut Self, AddUtxoError>
Add a utxo to the internal list of utxos that must be spent
+
sourcepub fn add_utxo(&mut self, outpoint: OutPoint) -> Result<&mut Self, AddUtxoError>
Add a utxo to the internal list of utxos that must be spent
 These have priority over the âunspendableâ utxos, meaning that if a utxo is present both in
 the âutxosâ and the âunspendableâ list, it will be spent.
-
sourcepub fn add_foreign_utxo(
    &mut self,
    outpoint: OutPoint,
    psbt_input: Input,
    satisfaction_weight: usize
) -> Result<&mut Self, AddForeignUtxoError>
Add a foreign UTXO i.e. a UTXO not owned by this wallet.
+
sourcepub fn add_foreign_utxo(
    &mut self,
    outpoint: OutPoint,
    psbt_input: Input,
    satisfaction_weight: usize
) -> Result<&mut Self, AddForeignUtxoError>
Add a foreign UTXO i.e. a UTXO not owned by this wallet.
 At a minimum to add a foreign UTXO we need:
 
 outpoint: To add it to the raw transaction.
@@ -134,56 +140,56 @@ graph using the only_witness_utxo any non-taproot psbt_input you pass to this
 method must have non_witness_utxo set otherwise you will get an error when finish
 is called.
-
sourcepub fn manually_selected_only(&mut self) -> &mut Self
Only spend utxos added by add_utxo.
+
sourcepub fn manually_selected_only(&mut self) -> &mut Self
Only spend utxos added by add_utxo.
 The wallet will not add additional utxos to the transaction even if they are needed to
 make the transaction valid.
-
sourcepub fn unspendable(&mut self, unspendable: Vec<OutPoint>) -> &mut Self
Replace the internal list of unspendable utxos with a new list
+
sourcepub fn unspendable(&mut self, unspendable: Vec<OutPoint>) -> &mut Self
Replace the internal list of unspendable utxos with a new list
 Itâs important to note that the âmust-be-spentâ utxos added with TxBuilder::add_utxo
 have priority over these. See the docs of the two linked methods for more details.
-
sourcepub fn add_unspendable(&mut self, unspendable: OutPoint) -> &mut Self
Add a utxo to the internal list of unspendable utxos
+
sourcepub fn add_unspendable(&mut self, unspendable: OutPoint) -> &mut Self
Add a utxo to the internal list of unspendable utxos
 Itâs important to note that the âmust-be-spentâ utxos added with TxBuilder::add_utxo
 have priority over this. See the docs of the two linked methods for more details.
-
sourcepub fn sighash(&mut self, sighash: PsbtSighashType) -> &mut Self
Sign with a specific sig hash
+
sourcepub fn sighash(&mut self, sighash: PsbtSighashType) -> &mut Self
Sign with a specific sig hash
 Use this option very carefully
-
sourcepub fn ordering(&mut self, ordering: TxOrdering) -> &mut Self
Choose the ordering for inputs and outputs of the transaction
-
sourcepub fn nlocktime(&mut self, locktime: LockTime) -> &mut Self
Use a specific nLockTime while creating the transaction
+
sourcepub fn ordering(&mut self, ordering: TxOrdering) -> &mut Self
Choose the ordering for inputs and outputs of the transaction
+
sourcepub fn nlocktime(&mut self, locktime: LockTime) -> &mut Self
Use a specific nLockTime while creating the transaction
 This can cause conflicts if the walletâs descriptors contain an âafterâ (OP_CLTV) operator.
-
sourcepub fn version(&mut self, version: i32) -> &mut Self
Build a transaction with a specific version
+
sourcepub fn version(&mut self, version: i32) -> &mut Self
Build a transaction with a specific version
 The version should always be greater than 0 and greater than 1 if the walletâs
 descriptors contain an âolderâ (OP_CSV) operator.
-
sourcepub fn do_not_spend_change(&mut self) -> &mut Self
Do not spend change outputs
+
sourcepub fn do_not_spend_change(&mut self) -> &mut Self
Do not spend change outputs
 This effectively adds all the change outputs to the âunspendableâ list. See
 TxBuilder::unspendable.
-
sourcepub fn only_spend_change(&mut self) -> &mut Self
Only spend change outputs
+
sourcepub fn only_spend_change(&mut self) -> &mut Self
Only spend change outputs
 This effectively adds all the non-change outputs to the âunspendableâ list. See
 TxBuilder::unspendable.
-
sourcepub fn change_policy(&mut self, change_policy: ChangeSpendPolicy) -> &mut Self
Set a specific ChangeSpendPolicy. See TxBuilder::do_not_spend_change and
+
sourcepub fn change_policy(&mut self, change_policy: ChangeSpendPolicy) -> &mut Self
Set a specific ChangeSpendPolicy. See TxBuilder::do_not_spend_change and
 TxBuilder::only_spend_change for some shortcuts.
-
sourcepub fn only_witness_utxo(&mut self) -> &mut Self
Only Fill-in the psbt::Input::witness_utxo field when spending from
+
sourcepub fn only_witness_utxo(&mut self) -> &mut Self
Only Fill-in the psbt::Input::witness_utxo field when spending from
 SegWit descriptors.
 This reduces the size of the PSBT, but some signers might reject them due to the lack of
 the non_witness_utxo.
-
sourcepub fn include_output_redeem_witness_script(&mut self) -> &mut Self
Fill-in the psbt::Output::redeem_script and
+
sourcepub fn include_output_redeem_witness_script(&mut self) -> &mut Self
Fill-in the psbt::Output::redeem_script and
 psbt::Output::witness_script fields.
 This is useful for signers which always require it, like ColdCard hardware wallets.
-
sourcepub fn add_global_xpubs(&mut self) -> &mut Self
Fill-in the PSBT_GLOBAL_XPUB field with the extended keys contained in both the external
+
sourcepub fn add_global_xpubs(&mut self) -> &mut Self
Fill-in the PSBT_GLOBAL_XPUB field with the extended keys contained in both the external
 and internal descriptors
 This is useful for offline signers that take part to a multisig. Some hardware wallets like
 BitBox and ColdCard are known to require this.
-
sourcepub fn drain_wallet(&mut self) -> &mut Self
Spend all the available inputs. This respects filters like TxBuilder::unspendable and the change policy.
-
sourcepub fn coin_selection<P: CoinSelectionAlgorithm>(
    self,
    coin_selection: P
) -> TxBuilder<'a, D, P, Ctx>
Choose the coin selection algorithm
+
sourcepub fn drain_wallet(&mut self) -> &mut Self
Spend all the available inputs. This respects filters like TxBuilder::unspendable and the change policy.
+
sourcepub fn coin_selection<P: CoinSelectionAlgorithm>(
    self,
    coin_selection: P
) -> TxBuilder<'a, D, P, Ctx>
Choose the coin selection algorithm
 Overrides the DefaultCoinSelectionAlgorithm.
 Note that this function consumes the builder and returns it so it is usually best to put this as the first call on the builder.
-
sourcepub fn finish(self) -> Result<Psbt, CreateTxError<D::WriteError>>where
    D: PersistBackend<ChangeSet>,
Finish building the transaction.
+
sourcepub fn finish(self) -> Result<Psbt, CreateTxError<D::WriteError>>where
    D: PersistBackend<ChangeSet>,
Finish building the transaction.
 Returns a new [Psbt] per BIP174.
-
sourcepub fn enable_rbf(&mut self) -> &mut Self
Enable signaling RBF
+
sourcepub fn enable_rbf(&mut self) -> &mut Self
Enable signaling RBF
 This will use the default nSequence value of 0xFFFFFFFD.
-
sourcepub fn enable_rbf_with_sequence(&mut self, nsequence: Sequence) -> &mut Self
Enable signaling RBF with a specific nSequence value
+
sourcepub fn enable_rbf_with_sequence(&mut self, nsequence: Sequence) -> &mut Self
Enable signaling RBF with a specific nSequence value
 This can cause conflicts if the walletâs descriptors contain an âolderâ (OP_CSV) operator
 and the given nsequence is lower than the CSV value.
 If the nsequence is higher than 0xFFFFFFFD an error will be thrown, since it would not
 be a valid nSequence to signal RBF.
-
sourcepub fn current_height(&mut self, height: u32) -> &mut Self
Set the current blockchain height.
+
sourcepub fn current_height(&mut self, height: u32) -> &mut Self
Set the current blockchain height.
 This will be used to:
 
 Set the nLockTime for preventing fee sniping.
@@ -194,12 +200,12 @@ If you want to create a transaction that spends immature coinbase inputs, manual
 add them using TxBuilder::add_utxos.
 
 In both cases, if you donât provide a current height, we use the last sync height.
-
sourcepub fn allow_dust(&mut self, allow_dust: bool) -> &mut Self
Set whether or not the dust limit is checked.
+
sourcepub fn allow_dust(&mut self, allow_dust: bool) -> &mut Self
Set whether or not the dust limit is checked.
 Note: by avoiding a dust limit check you may end up with a transaction that is non-standard.
-
sourceÂ§impl<'a, D, Cs: CoinSelectionAlgorithm> TxBuilder<'a, D, Cs, CreateTx>
sourcepub fn set_recipients(&mut self, recipients: Vec<(ScriptBuf, u64)>) -> &mut Self
Replace the recipients already added with a new list
-
sourcepub fn add_recipient(
    &mut self,
    script_pubkey: ScriptBuf,
    amount: u64
) -> &mut Self
Add a recipient to the internal list
-
sourcepub fn add_data<T: AsRef<PushBytes>>(&mut self, data: &T) -> &mut Self
Add data as an output, using OP_RETURN
-
sourcepub fn drain_to(&mut self, script_pubkey: ScriptBuf) -> &mut Self
Sets the address to drain excess coins to.
+
sourceÂ§impl<'a, D, Cs: CoinSelectionAlgorithm> TxBuilder<'a, D, Cs, CreateTx>
sourcepub fn set_recipients(&mut self, recipients: Vec<(ScriptBuf, u64)>) -> &mut Self
Replace the recipients already added with a new list
+
sourcepub fn add_recipient(
    &mut self,
    script_pubkey: ScriptBuf,
    amount: u64
) -> &mut Self
Add a recipient to the internal list
+
sourcepub fn add_data<T: AsRef<PushBytes>>(&mut self, data: &T) -> &mut Self
Add data as an output, using OP_RETURN
+
sourcepub fn drain_to(&mut self, script_pubkey: ScriptBuf) -> &mut Self
Sets the address to drain excess coins to.
 Usually, when there are excess coins they are sent to a change address generated by the
 wallet. This option replaces the usual change address with an arbitrary script_pubkey of
 your choosing. Just as with a change output, if the drain output is not needed (the excess
@@ -227,7 +233,7 @@ tx_builder
     .fee_rate(bdk::FeeRate::from_sat_per_vb(5.0))
     .enable_rbf();
 let psbt = tx_builder.finish()?;
-
sourceÂ§impl<'a, D> TxBuilder<'a, D, DefaultCoinSelectionAlgorithm, BumpFee>
sourcepub fn allow_shrinking(
    &mut self,
    script_pubkey: ScriptBuf
) -> Result<&mut Self, AllowShrinkingError>
Explicitly tells the wallet that it is allowed to reduce the amount of the output matching this
+
sourceÂ§impl<'a, D> TxBuilder<'a, D, DefaultCoinSelectionAlgorithm, BumpFee>
sourcepub fn allow_shrinking(
    &mut self,
    script_pubkey: ScriptBuf
) -> Result<&mut Self, AllowShrinkingError>
Explicitly tells the wallet that it is allowed to reduce the amount of the output matching this
 script_pubkey in order to bump the transaction fee. Without specifying this the wallet
 will attempt to find a change output to shrink instead.

 Note that the output may shrink to below the dust limit and therefore be removed. If it is
diff --git a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/example_bitcoind_rpc_polling/type.ChangeSet.html b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/example_bitcoind_rpc_polling/type.ChangeSet.html
index cacf4366b1..c650b3daca 100644
--- a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/example_bitcoind_rpc_polling/type.ChangeSet.html
+++ b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/example_bitcoind_rpc_polling/type.ChangeSet.html
@@ -1 +1 @@
-ChangeSet in example_bitcoind_rpc_polling - Rust
ChangeSet
In example_bitcoind_rpc_polling
?
Type Definition example_bitcoind_rpc_polling::ChangeSet
source Â· 
pub(crate) type ChangeSet = (ChangeSet, ChangeSet<ConfirmationTimeHeightAnchor, ChangeSet<Keychain>>);

\ No newline at end of file
+ChangeSet in example_bitcoind_rpc_polling - Rust
ChangeSet
In example_bitcoind_rpc_polling
?
Type Definition example_bitcoind_rpc_polling::ChangeSet
source Â· 
pub(crate) type ChangeSet = (ChangeSet, ChangeSet<ConfirmationTimeHeightAnchor, ChangeSet<Keychain>>);

\ No newline at end of file
diff --git a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/example_electrum/type.ChangeSet.html b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/example_electrum/type.ChangeSet.html
index b17942f23e..e65eaa0923 100644
--- a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/example_electrum/type.ChangeSet.html
+++ b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/example_electrum/type.ChangeSet.html
@@ -1 +1 @@
-ChangeSet in example_electrum - Rust
ChangeSet
In example_electrum
?
Type Definition example_electrum::ChangeSet
source Â· 
pub(crate) type ChangeSet = (ChangeSet, ChangeSet<ConfirmationHeightAnchor, ChangeSet<Keychain>>);

\ No newline at end of file
+ChangeSet in example_electrum - Rust
ChangeSet
In example_electrum
?
Type Definition example_electrum::ChangeSet
source Â· 
pub(crate) type ChangeSet = (ChangeSet, ChangeSet<ConfirmationHeightAnchor, ChangeSet<Keychain>>);

\ No newline at end of file
diff --git a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/example_esplora/type.ChangeSet.html b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/example_esplora/type.ChangeSet.html
index a98214f7c6..b687a49edc 100644
--- a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/example_esplora/type.ChangeSet.html
+++ b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/example_esplora/type.ChangeSet.html
@@ -1 +1 @@
-ChangeSet in example_esplora - Rust
ChangeSet
In example_esplora
?
Type Definition example_esplora::ChangeSet
source Â· 
pub(crate) type ChangeSet = (ChangeSet, ChangeSet<ConfirmationTimeHeightAnchor, ChangeSet<Keychain>>);

\ No newline at end of file
+ChangeSet in example_esplora - Rust
ChangeSet
In example_esplora
?
Type Definition example_esplora::ChangeSet
source Â· 
pub(crate) type ChangeSet = (ChangeSet, ChangeSet<ConfirmationTimeHeightAnchor, ChangeSet<Keychain>>);

\ No newline at end of file
diff --git a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/help.html b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/help.html
index 700c7c3d65..29b9c64e1f 100644
--- a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/help.html
+++ b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/help.html
@@ -1,2 +1 @@
-Rustdoc help

-                    Help
?
Rustdoc help
Back

\ No newline at end of file
+Rustdoc help
Help
?
Rustdoc help
Back

\ No newline at end of file
diff --git a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/settings.html b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/settings.html
index 9cff0c494d..1b4fa78213 100644
--- a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/settings.html
+++ b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/settings.html
@@ -1,2 +1 @@
-Rustdoc settings

-                    Settings
?
Rustdoc settings
Back

\ No newline at end of file
+Rustdoc settings
Settings
?
Rustdoc settings
Back

\ No newline at end of file
diff --git a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/src/bdk/wallet/tx_builder.rs.html b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/src/bdk/wallet/tx_builder.rs.html
index 6ebb3c722b..48ab73a34c 100644
--- a/docs/.vuepress/public/docs-rs/bdk/nightly/latest/src/bdk/wallet/tx_builder.rs.html
+++ b/docs/.vuepress/public/docs-rs/bdk/nightly/latest/src/bdk/wallet/tx_builder.rs.html
@@ -1068,6 +1068,14 @@
 1067
 1068
 1069
+1070
+1071
+1072
+1073
+1074
+1075
+1076
+1077
 // Bitcoin Dev Kit
 // Written in 2020 by Alekos Filini <alekos.filini@gmail.com>
 //
@@ -1269,6 +1277,10 @@
     /// * btc/kvB (0.00001000 btc/kvB == 1 sats/vB) using FeeRate::from_btc_per_kvb
     /// * sats/kwu (250 sats/kwu == 1 sats/vB) using FeeRate::from_sat_per_kwu
     /// Default is 1 sat/vB (see min_relay_fee)
+    ///
+    /// Note that this is really a minimum feerate -- it's possible to
+    /// overshoot it slightly since adding a change output to drain the remaining
+    /// excess might not be viable.
     pub fn fee_rate(&mut self, fee_rate: FeeRate) -> &mut Self {
         self.params.fee_policy = Some(FeePolicy::FeeRate(fee_rate));
         self
@@ -1279,6 +1291,10 @@
     /// If anyone sets both the fee_absolute method and the fee_rate method,
     /// the FeePolicy enum will be set by whichever method was called last,
     /// as the FeeRate and FeeAmount are mutually exclusive.
+    ///
+    /// Note that this is really a minimum absolute fee -- it's possible to
+    /// overshoot it slightly since adding a change output to drain the remaining
+    /// excess might not be viable.
     pub fn fee_absolute(&mut self, fee_amount: u64) -> &mut Self {
         self.params.fee_policy = Some(FeePolicy::FeeAmount(fee_amount));
         self

Enum bdk::wallet::tx_builder::AddForeignUtxoError

Enum bdk::wallet::tx_builder::AddForeignUtxoError

InvalidOutpoint(OutPoint)

MissingUtxo

Trait ImplementationsÂ§

impl Debug for AddForeignUtxoError

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Display for AddForeignUtxoError

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Error for AddForeignUtxoError

fn source(&self) -> Option<&(dyn Error + 'static)>

fn description(&self) -> &str

fn cause(&self) -> Option<&dyn Error>

fn provide<'a>(&'a self, demand: &mut Demand<'a>)

Auto Trait ImplementationsÂ§

impl RefUnwindSafe for AddForeignUtxoError

impl Send for AddForeignUtxoError

impl Sync for AddForeignUtxoError

impl Unpin for AddForeignUtxoError

impl UnwindSafe for AddForeignUtxoError

Blanket ImplementationsÂ§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for Twhere T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for Twhere T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

fn from(t: T) -> T

Trait ImplementationsÂ§

impl Debug for AddForeignUtxoError

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Display for AddForeignUtxoError

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Error for AddForeignUtxoError

fn source(&self) -> Option<&(dyn Error + 'static)>

fn description(&self) -> &str

fn cause(&self) -> Option<&dyn Error>

fn provide<'a>(&'a self, demand: &mut Demand<'a>)

Auto Trait ImplementationsÂ§

impl RefUnwindSafe for AddForeignUtxoError

impl Send for AddForeignUtxoError

impl Sync for AddForeignUtxoError

impl Unpin for AddForeignUtxoError

impl UnwindSafe for AddForeignUtxoError

Blanket ImplementationsÂ§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for Twhere T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for Twhere T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

fn from(t: T) -> T

impl<T, U> Into<U> for Twhere U: From<T>,

fn into(self) -> U

Enum bdk::wallet::tx_builder::AddUtxoError

Enum bdk::wallet::tx_builder::AddUtxoError

VariantsÂ§

UnknownUtxo(OutPoint)

Trait ImplementationsÂ§

impl Debug for AddUtxoError

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Display for AddUtxoError

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Error for AddUtxoError

fn source(&self) -> Option<&(dyn Error + 'static)>

fn description(&self) -> &str

fn cause(&self) -> Option<&dyn Error>

fn provide<'a>(&'a self, demand: &mut Demand<'a>)

Auto Trait ImplementationsÂ§

impl RefUnwindSafe for AddUtxoError

impl Send for AddUtxoError

impl Sync for AddUtxoError

impl Unpin for AddUtxoError

impl UnwindSafe for AddUtxoError

Blanket ImplementationsÂ§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for Twhere T: ?Sized,

`Enum bdk::wallet::tx_builder::AddForeignUtxoError`

`Trait ImplementationsÂ§`

`Auto Trait ImplementationsÂ§`

`Blanket ImplementationsÂ§`

impl<T> Any for Twhere
T: 'static + ?Sized,

impl<T> Borrow<T> for Twhere
T: ?Sized,

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

`Trait ImplementationsÂ§`

`Auto Trait ImplementationsÂ§`

`Blanket ImplementationsÂ§`

impl<T> Any for Twhere
T: 'static + ?Sized,

impl<T> Borrow<T> for Twhere
T: ?Sized,

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

impl<T, U> Into<U> for Twhere
U: From<T>,

`Enum bdk::wallet::tx_builder::AddUtxoError`

`VariantsÂ§`

`Trait ImplementationsÂ§`

`Auto Trait ImplementationsÂ§`

`Blanket ImplementationsÂ§`

impl<T> Any for Twhere
T: 'static + ?Sized,

impl<T> Borrow<T> for Twhere
T: ?Sized,

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

`Trait ImplementationsÂ§`

`Auto Trait ImplementationsÂ§`

`Blanket ImplementationsÂ§`

impl<T> Any for Twhere
T: 'static + ?Sized,

impl<T> Borrow<T> for Twhere
T: ?Sized,

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

impl<T, U> Into<U> for Twhere
U: From<T>,